HVAC Installation in Morgan, UT
A new system here will heat from September through June and cool from July through July every year. Tell us about the house, and a licensed contractor who covers Morgan County will get in touch.
Tell us about the job
It takes about a minute.
Ten months of heat, one month of real cooling
Winter nights here average 17°F from December through February. A new furnace has to carry the house through cold like that from September into June, ten months of heating a year. Most homes in the area run on gas, so the furnace does the real work while the air conditioner sits idle most of the year.
Summer only asks for cooling in July, with afternoons averaging 78°F. That is a short season, but a new system still has to be sized for it, not just for the winter that dominates the calendar here. Whatever gets installed needs to handle both, the long cold stretch and the brief hot one.
- 10 months
- September through June, your system heats
- 1 months
- July through July, it cools
- 17°F
- the average winter night it heats against
- 78°F
- the average summer afternoon it cools against
NOAA nClimDiv, 1991–2020 normals
Utah requires HVAC contractors to hold a state license.
The Division of Professional Licensing issues that license, and it belongs to the contractor, not to any one job. It means the state has tested this contractor and keeps a record of them. Work under $7,000 is exempt and does not need a licensed contractor, but installing a heating and cooling system runs well past that on its own.
So for this job, the license is what stands behind the work. Beyond that, most cities and counties require a permit for this kind of installation, and an inspection once it is done, which is where the local building office checks that the work was done right.
Sources: Utah State Legislature · Utah Department of Commerce
- When should I replace my HVAC system?
- Replace it when repairs start piling up or the system can't keep the house comfortable through the range of weather here, from 17°F winter nights to 78°F summer afternoons. A furnace or air conditioner nearing the end of its life tends to break down more in the months it works hardest, and here that's nearly every month since homes need heat or cooling 11 months out of the year. If a contractor is telling you a repair costs a large share of what a new system would, that's usually the point to stop patching it.
- Should I replace my furnace and air conditioner at the same time?
- If both are old, replacing them together often makes sense, but it depends on the condition of each one. A furnace and air conditioner installed at different times wear at different rates, so it's possible for one to still have good years left while the other doesn't. A contractor can look at the age and condition of both and tell you whether pairing the work makes sense for your house, since with 91.4% of homes here heating with gas, the furnace is doing most of the work most of the year.
- What happens during an HVAC installation?
- A contractor removes the old equipment, sets the new furnace and air conditioner or heat pump in place, and connects them to the ductwork, gas or electrical lines, and thermostat. Once it's running, they test it and check that it's heating and cooling the way it should. In most cities and counties, a job like this needs a permit from the local building office and an inspection when the work is done. Utah licenses HVAC contractors through the Division of Professional Licensing, and that license covers the contractor, not the job, so it's worth confirming who's doing the actual work. A contractor can price the job once they've seen the house.