Mini Split Installation in Morgan, UT
A new system here will heat from September through June and cool from July through July every year. Tell us about the house, and a licensed contractor who covers Morgan County will get in touch.
Tell us about the job
It takes about a minute.
A mini-split here works nearly eleven months a year
Morgan County asks for heat from September through June and cooling for July. That is eleven months of the year one system is doing the work, with winter nights averaging 17°F and summer afternoons around 78°F. A mini-split installed here needs to hold up on the cold end far more than the hot one, since the heating stretch is ten times longer than the cooling stretch.
Most homes here heat with gas, so a new mini-split is often going in as a second source or to cover a room the furnace doesn't reach well. Any unit manufactured now has to meet the federal minimum of 14.3 SEER2 for cooling and 7.5 HSPF2 for heating, since a ductless heat pump falls under the same split-system rule as any other. What matters more for a place like this is how it performs on the coldest nights, not just whether it clears that minimum.
- 10 months
- September through June, your system heats
- 1 months
- July through July, it cools
- 17°F
- the average winter night it heats against
- 78°F
- the average summer afternoon it cools against
NOAA nClimDiv, 1991–2020 normals
Utah requires HVAC contractors to hold a state license.
The license is issued to the contractor by the Division of Professional Licensing. It covers the contractor, not the job itself. Utah also sets a line at $7,000. Work under that amount does not need a licensed contractor. A mini-split installation can fall on either side of that line depending on what the job costs.
If the job costs $7,000 or more, the license is what stands behind the work. If it costs less, that protection does not apply, and what is left is the permit. Most cities and counties require a permit for this kind of installation, along with an inspection once the work is done.
Sources: Utah State Legislature · Utah Department of Commerce
- Is a mini split worth it?
- It depends on what you're heating and how the rest of the house is set up. A mini split gives you heating and cooling in rooms that don't have ducts, or a room that never gets right with the rest of the house. Homes here need heat from September through June, and winter nights average 17°F, so if you're counting on one for whole-house heat, the unit needs to be rated for real cold, not just mild weather. For a single room or an addition, it's often the simplest fix. A contractor can look at your layout and tell you whether it covers what you need or whether it's better paired with your existing system.
- How many rooms can a mini split cover?
- A single indoor head covers one room or one open space well. If you need more than that, you install a multi-zone system, which runs several indoor heads off one outdoor unit. Each head has its own thermostat, so you can heat or cool rooms separately instead of running one system for the whole house. How many rooms your house can cover depends on the outdoor unit's capacity and where each room sits, which is why a contractor sizes the system room by room rather than guessing at a number.
- Can a mini split heat a whole house?
- Yes, but it takes the right size and enough indoor heads to reach every room. A multi-zone mini split with a head in each main room can heat a whole house the same way a furnace does, just without ducts. Winter nights here average 17°F from December through February, so the outdoor unit has to be rated to keep working at that cold, not just to shut off when it gets hard. A contractor can size the system for your house and tell you whether ductless heat alone will carry it through the winter.