Mini Split Installation in Roosevelt, UT
Tell us about the house, and a licensed contractor who covers Duchesne County will get in touch.
Tell us about the job
It takes about a minute.
Roosevelt asks a mini-split to run nearly all year
Winter nights here average 12°F from December through February. That is a heat pump's hardest job, pulling warmth out of air that cold, and it has to do that work for ten months of the year, September through June. Summer afternoons average 76°F, so cooling is rarely the concern. The unit needs to be sized and set up for those cold nights, because that is where it will spend most of its time working.
Any mini-split installed now has to meet federal minimums of 14.3 SEER2 for cooling and 7.5 HSPF2 for heating. Here, where heating runs ten months and cooling barely comes up, how well a unit holds heat on a 12°F night matters more than its cooling number.
- 10 months
- September through June, your system heats
- 12°F
- the average winter night it heats against
- 76°F
- the average summer afternoon it cools against
Utah requires HVAC contractors to hold a state license.
The Division of Professional Licensing is the body that issues that license. It covers the contractor, not the specific job. It is tied to the person or business doing the work, not to your address. Utah also sets a line at $7,000. Work under that amount does not need a licensed contractor. A mini-split installation can land on either side of that line depending on the equipment and the job.
If this job goes to a licensed contractor, that license is what stands behind the work. Most cities and counties in Utah also require a permit for an installation like this, along with an inspection once the work is done. That is the local building office checking the work. It is separate from the state license.
Sources: Utah State Legislature · Utah Department of Commerce
- Is a mini split worth it?
- For a home here, yes, because a mini split heat pump handles the ten months a year you need heat or cooling with one system. Winter nights average 12°F, and a modern heat pump is built to keep working at those temperatures, pulling heat from outside air even when it's cold. It also cools the rare warm afternoon without any separate equipment. Since there's no ductwork involved, it avoids the losses that come with air traveling through vents to reach a room.
- How many rooms can a mini split cover?
- A single outdoor unit can run one indoor head or several, with multi-zone systems built to serve more than one room from the same condenser. Each indoor head is set to its own room and its own temperature. How many rooms you can cover comes down to the total heating and cooling load of those rooms, not just a room count. A contractor will size the system to the house.
- Can a mini split heat a whole house?
- Yes, if it's sized and placed for that. A multi-zone mini split with an indoor head in each main room can heat the whole house, and that matters here since you need heat from September through June. Whether one system covers your whole house or you need multiple outdoor units depends on the layout and how much heat each room loses on a 12°F night. A contractor can work that out room by room.